61微信怎么买双色球:News Center

Steel Dynamics to Acquire Vulcan Threaded Products to Expand Finishing

Update:04 Aug 2016
Summary:

微信彩票竞彩 www.xwjjtc.com.cn With the rapid development of technology, the scope and […]

With the rapid development of technology, the scope and role of lithium batteries have long been self-evident, but in our daily life, lithium battery accidents are always emerging, which is always plaguing us. In view of this, Qianguo Electronics has specially arranged Lithium ion common problem analysis and solutions, I hope to provide convenience for everyone.
First, the voltage is inconsistent, and the individual is low
1. High self-discharge, resulting in low voltage
The self-discharge of the battery core makes the voltage drop faster than others, and the low voltage can be eliminated by detecting the voltage after storage.
2. Uneven current causes low voltage
When the battery is tested and charged, the cell is not uniformly charged due to the contact resistance or the inconsistent current of the test cabinet. In the short-term storage (12 hours), the voltage difference is small, but the voltage difference is large during long-term storage. This low voltage has no quality problems and can be solved by charging. Store the voltage for 24 hours after charging in production.
Second, the internal resistance is too large
1. Detecting equipment differences
If the detection accuracy is not enough or the contact electric power group cannot be eliminated, the internal resistance of the display will be too large. The internal resistance instrument test should be tested by the principle of AC bridge method.
2. Long storage time
Lithium batteries are stored too long, resulting in excessive capacity loss, internal passivation, and increased internal resistance, which can be solved by charge and discharge activation.
3. Abnormal heat caused by internal resistance
The battery is processed (spot welding, ultrasonic, etc.) to abnormally heat the battery, causing the diaphragm to be thermally closed, and the internal resistance is seriously increased.
Third, lithium battery expansion
1. Lithium battery expands when charging
When the lithium battery is being charged, the lithium battery naturally expands, but generally does not exceed 0.1 mm, but overcharging causes the electrolyte to decompose, the internal pressure increases, and the lithium battery expands.
2. Swell during processing
Generally, processing abnormalities (such as short circuit, overheating, etc.) cause the internal heat to be excessively decomposed and the lithium battery expands.
3. Swell during circulation
When the battery is circulating, the thickness will increase with the number of cycles, but it will not increase after more than 50 weeks. Generally, the normal increase is 0.3~0.6 mm, and the aluminum shell is more serious. This phenomenon is caused by normal battery reaction. However, if the thickness of the casing is increased or the internal material is reduced, the expansion phenomenon can be appropriately reduced.

Fourth, the battery has power failure after spot welding
The voltage of the aluminum shell after spot welding is lower than 3.7V. Generally, the spot welding current is too short to cause the internal diaphragm of the battery to break down, causing the voltage to drop too fast.
Generally, the spot welding position is incorrect. The correct spot welding position should be spot welded at the bottom or marked with “A” or “—”. The unmarked sides and large faces cannot be spot welded. In addition, some of the spot-welded nickel strips have poor solderability, so large current spot welding must be used, so that the internal high-temperature resistant tape does not work, causing internal short-circuiting of the cells.
Part of the battery power loss after spot welding is also partly due to the large self-discharge of the battery itself.
Five, battery explosion
There are several situations in which a battery explosion can occur:
1. Overcharge explosion
If the protection circuit is out of control or the detection cabinet is out of control, the charging voltage is greater than 5V, causing the electrolyte to decompose, the battery reacts violently inside, the internal pressure of the battery rises rapidly, and the battery explodes.
2. Overcurrent explosion
If the protection circuit is out of control or the control cabinet is out of control, the charging current is too large, so that the lithium ions are not embedded, and lithium metal is formed on the surface of the pole piece, and the diaphragm is penetrated, and the positive and negative poles are directly short-circuited to cause an explosion (rarely occurring).
3. Ultrasonic welding of plastic casing when exploding
When the plastic shell is ultrasonically welded, the ultrasonic energy is transferred to the battery core due to the equipment. The ultrasonic energy is so great that the internal diaphragm of the battery is melted, and the positive and negative electrodes are directly short-circuited to cause an explosion.
4. Explosion during spot welding
When the spot welding is too large, the internal short circuit will cause an explosion. In addition, the positive connection piece is directly connected to the negative electrode during spot welding, so that the positive and negative electrodes are directly short-circuited and then exploded.
5. Over-explosion
Over-discharge or over-current discharge of the battery (above 3C) tends to cause the negative copper foil to be dissolved and deposited on the separator, so that the positive and negative electrodes are directly short-circuited to cause an explosion (rarely occurring).
6. Explosion when the vibration falls
The inner pole piece of the cell caused by the cell vibrating or falling sharply is misaligned, and it is directly short-circuited and explodes (rarely occurs).
Sixth, the battery 3.6V platform is low
1. Inaccurate sampling of the test cabinet or instability of the test cabinet results in a low test platform.
2. Low ambient temperature causes the platform to be low (discharge platform is greatly affected by ambient temperature)
7. Improper processing
(1) Forcefully move the spot welding positive electrode connecting piece to cause poor contact of the positive electrode of the battery core, so that the internal resistance of the battery core is large.
(2) The spot welding connecting piece is not welded firmly, and the contact resistance is large, so that the internal resistance of the battery is large.
????????In short, the choice of lithium battery products to choose a professional lithium battery manufacturers to produce high-quality, high-quality lithium battery products, in order to effectively avoid problems. Qianguo Electronics, a professional lithium battery product and service provider.